The Industrial Ovens Blog

David Reger – Winston Heat Treating, President Richard Conway – DELTA H®, Director, Chief Technology Officer Twin SCAHT®-HD Tempering Furnaces Certified for Aerospace Parts Production
DELTA H® Provides Winston Heat Treating Two SCAHT® Heavy Duty Tempering Furnaces For Ferrous Alloys And Aging PH Stainless Steels Featuring Class 1 Performance News

DELTA H® Provides Winston Heat Treating Two SCAHT® Heavy Duty Tempering Furnaces For Ferrous Alloys And Aging PH Stainless Steels Featuring Class 1 Performance

Dayton, OH:  DELTA H® recently supplied twin SCAHT®-HD (Heavy Duty) Series convection furnace systems to Winston Heat Treating.  The furnaces replaced older tempering systems that were extremely difficult to qualify to even Class 5 (+/- 25F).  Pyrometry expert Andrew Bassett of Aerospace Testing and Pyrometry (ATP) recommended to Winston Heat Treating management the acquisition of DELTA H furnaces as “the easiest furnace brand to qualify and maintain for aerospace pyrometry compliance, for this specific application”.  The furnaces had to be “heavy duty” for rugged daily use in a commercial heat treating facility.  Another challenging aspect was the ability to heat…
Ellen Conway
February 15, 2023
DELTA H® Provides RIDGID® TOOLS Twin SCAHT® Furnace Systems Featuring Rapid Heating and Cooling News

DELTA H® Provides RIDGID® TOOLS Twin SCAHT® Furnace Systems Featuring Rapid Heating and Cooling

Elyria Ohio:  DELTA H® recently delivered twin furnace systems to RIDGID® TOOLS.  The challenging requirement was to heat parts from ambient to 975°F, soak for 2 hours, cool to 120°F as fast as possible, soak 2 hours, then repeat.  The solution was an innovative design featuring all stainless steel interior and low mass ceramic fiber insulation for minimal heat retention.  High powered electric heating elements, coupled with pneumatically operated blast gates and proprietary ductwork / venting enabled the system to accomplish the requirements with precise repeatability total reliability as a “cold to cold” heat treating operation.     The furnaces feature a…
Ellen Conway
October 18, 2022
First Heat Treating System Certified To AMS2750H News

First Heat Treating System Certified To AMS2750H

DELTA H®  and Phillips Federal Deliver To Tinker AFB, OK - USAF, Their First AMS2750H Qualified Heat Treating System For Military Aircraft Oklahoma City – Tinker AFB:  DELTA H® recently delivered the first heat treating system certified to AMS2750H for heat treating aviation grade aluminum for military aircraft.  The new system is the second installation at the massive depot facility and placed side by side with the previous system installed in 2015.  Third party services for calibration and qualification were performed by Andrew Bassett of Aerospace Testing and Pyrometry and completed within one day on site. The certifications for instrumentation,…
Ellen Conway
October 10, 2022
Defender Series News

Defender Series

DELTA H® is very proud to be among the technology providers supporting the missions of Edwards Air Force Base - and to serve on the cutting edge of experimental aviation at this storied and historic airfield. Recently DELTA H® delivered two "Defender Series" dual chamber aerospace heat treating (DCAHT®) systems which were developed for the unique requirements of the armed forces. Defender Series meet the pyrometry standards of USAF/NAVAIR Tech Order 1-1A-9, and qualify to SAE AMS2750H. Upgrade packages to full compliance are available that include advanced and secure software for batch records, full certified operator and quality control training,…
Ellen Conway
September 27, 2022