The Industrial Ovens Blog

Facts About Metal Hardness and Heat Treating News

Facts About Metal Hardness and Heat Treating

Hardness is the nearly universal measurement of heat treating performance. This is because specific materials processed to the required hardness perform well under certain loads. For example, spring steel at a hardness of Rockwell C45 performs well as a spring. Experience has shown that a hardness of Rc45 in spring steel correlates with toughness, resilience, and high fatigue strength. The correlation is consistent and Rc45 is accepted as a quality hardness in heat-treated springs, even though the hardness itself is not an important characteristic of a spring. For many parts where tensile strength, toughness, or fatigue strength may be the…
Ellen Conway
March 7, 2018
Things to Consider When Purchasing an Industrial Oven: News

Things to Consider When Purchasing an Industrial Oven:

Things to consider when purchasing an Industrial Oven or Furnace This blog explains the importance of hardness, heat treating, stress, and design that must be considered when purchasing an industrial oven. Hardness Requirements Hardness requirements describe which hardness tests (Rockwell, Brinell, etc.) and range are required. For tool steels, a three-point hardness range is desirable, such as “Rockwell C 60-62.” Five to six points below Rockwell C 50 should be allowed in hardness. Inspection locations and critical areas in which hardness tests are not allowed should be noted. Stock removal for preparing surfaces for hardness checks should be noted, if…
Ellen Conway
January 31, 2018
DELTA H Heat Treating Solution Used to Restore Historic Plane Heat TreatingNewsProjects

DELTA H Heat Treating Solution Used to Restore Historic Plane

A DELTA H heat treating solurion is currently restoring a legendary plane to its former glory. The Lockheed Constellation is an elegantly designed propeller driven transport airliner for military and civilian use. Often referred to as "Connie" the airliner remained in production from 1943 to 1958. Restoration of planes like the Constellation typically happens for one of two reasons. They become a static display in a museum or to be made airworthy. Static display restorations ensure the plane is seen in its former glory which will allow future generations a glimpse of the past. According to the Strategic Air & Space Museum. In contrast, restoring a plane…
Ellen Conway
January 31, 2018
Attention MRO Facilities – HEAT TREATING FURNACES News

Attention MRO Facilities – HEAT TREATING FURNACES

Heat Treating Furnaces Designed For Aerospace Heat Treating Applications  Press Release: January 24, 2018  Columbus Ohio:  DELTA H TECHNOLOGIES, LLC manufacturer of aerospace heat treating furnaces recently shipped a high-temperature heat treating furnace designed specifically for heat treating aluminum, titanium (jet engine components), PH stainless steel (landing gear components), A-286 (high-temperature fasteners, turbine blades, jet engine components), tool steels with oil quench for hardening in an air or argon atmosphere.  System features include: Class 2 (+/- 10°F at 1950°F) uniformity, oil quench tank, quench delay timing, precision temperature control, simple controls, batch recording, high efficiency, simple to perform TUS, SAT, with a…
Ellen Conway
January 24, 2018